ToolForIt

Gravel and Sand Calculator – Calculate Required Aggregate Amount for Landscaping Projects

The gravel and sand calculator determines the required amount of gravel, sand, or other aggregates in volume (m³) and weight (tons) based on area and thickness. Perfect for yard graveling, walkways, and fill projects.

Enter the area length × width and desired layer thickness in centimeters, and the calculator will compute cubic meters and tons. You can also calculate multiple areas together. Ordering deliveries becomes easier when you know the exact amount.

How Much Gravel is Needed for Yard Graveling?

A 10 × 5 meter area at 10 cm thickness requires 5 m³ of gravel, or about 8–9 tons (gravel density approximately 1.7 t/m³). One truck load typically carries 10–20 tons. For walkway graveling, a 5–8 cm layer suffices, while parking areas need 15–20 cm. The calculator computes the exact amount automatically.

Loading tool...

Not sure what to try next?

Browse all tools →
📚 More Info

The gravel and sand calculator estimates the amount of gravel or sand needed based on area dimensions. A handy tool for planning yard and landscaping work and ordering materials.

✅ What does this do?

Enter area dimensions and layer thickness, and the calculator tells you the required material amount in tons and cubic meters.

  • Calculate gravel, sand, or crushed stone consumption in cubic meters and tons.
  • Enter area length, width, and desired layer thickness.
  • Consider material density for more accurate tonnage calculation.
🧠 How to interpret results?

The calculated amount is theoretical – in the field, consumption is affected by ground irregularities and compaction.

  • Add 5-10% extra to the result for compaction and ground irregularities.
  • Different material densities vary: gravel about 1.5-1.8 t/m³, sand about 1.4-1.6 t/m³.
  • A truck load is typically 5-15 tons – convert your needs to truck loads.
⚠️ Good to know

Material selection depends on use – different jobs suit different grain sizes.

  • Coarser crushed stone is used for driveway foundations, finer for surfaces.
  • Base layer thickness and material affect structure durability.
  • For larger projects, consult earthwork professionals.
Note: The calculator is approximate – order slightly more material than needed due to compaction.
Found an error or have a suggestion? info@…